涡扇发动机故障诊断硬件在回路实时仿真平台

硬件在回路仿真是发动机故障诊断算法由理论转向实际工程应用的重要阶段,但目前航空发动机故障诊断算法的研究多数处于软件数字仿真阶段。构建民用涡扇发动机故障诊断算法硬件在回路实时仿真验证平台,开发考虑健康退化的民用涡扇发动机多维调度分段线性化模型,分析并模拟仿真民用涡扇发动机的四类典型常见故障。经过对相关诊断算法进行实验验证,表明该平台及使用的模型和方法都是行之有效的,具有一定的工程使用价值。     

基于主动失谐优化的叶轮瞬态加减速振动抑制

提出了一种基于主动失谐优化的叶轮瞬态加减速振动抑制方法.首先建立了瞬态加减速激励下的叶轮降阶模型,获得了表征失谐对瞬态振幅影响的失谐放大因子.然后基于降阶模型,采用蒙特卡洛仿真快速计算了一系列瞬态激励下失谐放大因子的概率密度分布,结果表明:失谐放大因子在大多数瞬态激励下受到随机小失谐的影响大于在稳态激励下受到的影响,且...     

金属任意腐蚀损伤量的日历寿命计算模型和曲线

国际机械日历寿命研究,都是在假设已知腐蚀损伤容限Dc的前提下,求在这个Dc下的金属日历寿命。为了便于应用,本文不再假设腐蚀损伤容限Dc为已知数,而是把Dc当做变量,求金属任意腐蚀损伤量Di的日历寿命。本文通过多方面深入研究,发现腐蚀试验溶液的浓度dt与试验时间Ht的乘积除以试验获得的腐蚀损伤Dt等于一个常数。由此给出一种简单易行的金属任意腐蚀损伤量日历寿命的计算模型和相应的求解曲线。由此模型或曲线,可求得金属任意腐蚀损伤量的日历寿命。     

电离层顶部电子含量对GNSS电离层层析的影响分析

卫星信号射线上的总电子含量(slant total electron content, STEC)是像素基全球卫星导航系统电离层层析(computerized ionospheric tomography, CIT)建模的必要数据来源，但电离层层析通常忽略1 000 km以上的顶部电子含量，为弄清这部分电子含量对层析结果的影响，利用NeQuick2模型计算站星视线上的STEC与其在电离层区域内的STEC比值来改正原始数据，并分别利用改正前后的STEC进行电离层层析。结果显示，电离层顶部电子含量占比约为10%，白天占比略大于黑夜，与测高仪站的数据相比，改正后的均方根值比改正前提高了20%以上；与Swarm卫星提供的电子剖面数据对比，改正后的层析结果精度较改正前提升了19.6%左右，且该方法受地磁扰动影响较为明显。总的来说，利用CIT进行小尺度电离层探测，可较直观地看出，顶部电子含量对层析结果的影响较大，需要采取相应手段予以剔除。     

面向分析的产品建模技术概述

针对当前面向制造的产品模型对产品设计后续数值模拟阶段的适应性不足的问题,为提高产品几何模型与分析模型转换效率,分析了产品模型在数值模拟中的表达形式,总结了面向分析的建模所面临的问题,归纳出面向分析的建模需求,通过改进现有的参数化建模方法,提出了面向分析的产品建模技术及其结构框架,最后以涡轮叶片为例,创建能够适应后续数值模拟的涡轮叶片模型,在一定程度上降低了叶片设计分析一体化的难度,同时对其他高质量数字化模型的创建也有一定的参考价值。     

UNLX系统下软件开发版本管理初探

在ＵＮＬＸ操作系统下开发软件，开发过程中容易出现版本管理的混乱，为解决此问题，应充分利用系统提供的ＲＣＳ或ＳＣＣＳ工具，结合ｓｈｅｌｌ程序，充分发挥版本管理的作用。     

Coupling behavior between adhesive and abrasive wear mechanism of aero-hydraulic spool valves

Leakage due to wear is one of the main failure modes of aero-hydraulic spool valves. This paper established a practical coupling wear model for aero-hydraulic spool valves based on dynamic system modelling theory. Firstly, the experiment for wear mechanism verification proved that adhesive wear and abrasive wear did coexist during the working process of spool valves. Sec-ondly coupling behavior of each wear mechanism was characterized by analyzing actual time-variation of model parameters during wear evolution process. Meanwhile, Archard model and three-body abrasive wear model were utilized for adhesive wear and abrasive wear, respectively. Furthermore, their coupling wear model was established by calculating the actual wear volume. Finally, from the result of formal test, all the required parameters for our model were obtained. The relative error between model prediction and data of pre-test was also presented to verify the accuracy of model, which demonstrated that our model was useful for providing accurate prediction of spool valve’s wear life.     

基于构架和构件复用的飞机自动钻铆开放式数控系统

针对当前轻型自动装配系统数控系统开发过程中周期长、稳定性差的问题,提出一种基于构架和构件复用的开放式数控系统,可实现软件复用,降低开发成本和周期.结合EtherCAT工业以太网和Ethemet技术进行了钻铆系统的集成,并在单机器人自动钻铆系统和双机器人自动钻铆系统上进行了验证,验证系统可行.     

基于状态维修策略下的数据自动获取技术

阐述了在基于状态的维修策略下飞机状态参数的自动获取技术的实现过程和此过程中的技术难点,突破了飞机原厂家默认触发的状态数据的局限性,验证了以自主状态报文获取所需飞机状态数据的技术可行性,实现了飞机状态数据的自主筛选与传递。     

Lateral Flight Technical Error Estimation Model for Performance Based Navigation

Flight technical error (FTE) combined with navigation system error (NSE) is the main part of total system error (TSE) in performance based navigation (PBN).The implementation of PBN requires pre-flight prediction and en-route short-term dynamical prediction of the TSE.Once the sum of predicted lateral FTE and NSE is greater than the specified PBN value,the PBN cannot operate.Thus,accurate modeling and thorough analysis of lateral FTE are indispensible.Multiple-input multiple-output (MIMO) lateral track control system of a transport aircraft is designed using linear quadratic Gaussian and loop transfer recovery (LQG/LTR) method,and the lateral FTE of a turbulence disturbed approach operation is analyzed.The error estimation mapping function of latera FTE and its bound estimation algorithm are proposed based on singular value theory.According to the forming mechanism of lateral FTE,the algorithm considers environmental turbulence fluctuation disturbance,aircraft dynamics and control system parameters.Real-data-based Monte-Carlo simulation validates the theoretical analysis of FTE.It also shows that FTE is mainly caused by turbulence fluctuation disturbance when automatic flight control system (AFCS) is engaged and would increase with escalating environmental turbulence intensity.